Bricolage / Search results for "Fan"

Air Quality Sensor  

Provides fully automatic control. Detects contaminants such as cigarette smoke, body odours, toilet odours and cooking smells. Activates ventilation system when preset threshold is...

Xpelair Speed controller. (1A)  

Slide switch produces on/off Features Adjustable control for infinitely variable speed. Fan Indicator light. Surface or recess mounting. Suitable for ambient temperatures up to...

Manrose Humidistat 0950  

Can be retro-fitted onto the side or top of most makes of extractor fans and wired into the live supply of the fan motor, thus converting a standard fan to a humidity controlled...

3 Phase 1.5 Amp transformer controller  

1.5 amp 3phase transformer speed controller from S&P....

0-10v Fan speed controller  

1Amp single phase controller for fans. Controlled by a 0 to 10v control signal. Nominal Supply 230Vac/1Ph/50-60Hz Control type Auto from remote signal On/Off switch Mounted on side...

PIR Sensor  

A PIR detector ideal for use in buildings, stairwells, corridors, warehouses, toilet lobbies or any area where ventilation or lighting is only required upon occupancy. Features •...

Electronic speed controller (5.0A)  

Continuously variable controller for fans. Available in 1.5A, 3A and 5A current ratings. Protected to IP44 Please note electronic controllers can make fans buzz slightly. This is...

AIRVENT speed control  

Provide 2 forward speeds and reverse for the AIRVENT 9 and 12 inch commercial fan....

Manrose Humidistat 1360  

Variable from 20 to 90 degrees relative humidity. Is usually fitted remotely to the fan. Inside, the same electronics as the 0950 Manrose humidstat Mechanical type switching, for a...

Room Thermostat  

Thermostat for wall mounting in a room to switch fans on or off at required temperature. Mechanical type switching...

Run On Timer - 0 - 20min  

A multi input run on timer that accepts up to 3 inputs to start a fan and gives a run on period after the inputs have been switched off. Thus you can trigger a fan by a number of...

Remote Fan Status Indicator - Dual  

Dual 230v LED clusters in a surface mount enclosure. For use with airflow proving devices or auto changeover panels fitted with volt free contacts for fan run and fan fail....

REB16 Speed Controller  

Electronic single-phase speed controller. 16 Amp Companion controller for most of the S&P range of fans. Surface mounted. Fuse protected. Minimum speed adjustment. Separate On/ Off...

Time Delay Unit  

Connected to a switching circuit such as bathroom lighting. Provides adjustable run on time delay after the light has been switched Off. Time adjustable up to 20 minutes. Surface...

Run On Timer - 5s - 4hrs  

The RT5A is a multi-range run-on timer with time delay adjustment from 5 seconds to 4 hours. Time ranges are set by means of the internal DIL switches and delay time can be set...

REB1 Speed Controller  

Electronic single-phase speed controller. 1 Amp Companion controller for most of the S&P range of fans, including the compact axial fan. Surface mounted. Fuse protected. Minimum...

REB2.5 Speed Controller  

Electronic single-phase speed controller. 2.5 Amp Companion controller for most of the S&P range of fans, including the compact axial fan....

REB6 Speed Controller  

Electronic single-phase speed controller. 6 Amp Companion controller for most of the S&P range of fans, including the compact axial fan. Surface mounted. Fuse protected. Minimum...

CR-300 Control with reverse  

CR-300 Control unit for HV-230 A, HV-300 A and HVE-230 A Fitted with: – A selector for the different modes of fan operation (0ff and Two Speed Settings) – A reversing switch to...

EFSC Electronic Fan Speed Controller  

A range of Electronic Fan Speed Controllers designed for speed controllable single phase motors up to 10 amps. The EFSC1.5 3, 5, 6 & 10 all have an illuminated on/off rocker switch...